Danfoss iC7 Motion Series Application Manual page 209

Application Guide | iC7 Series Motion
Speed Reference (Menu Index 5.8.4)
6.6.10.6
P 5.8.4.1 Speed Reference 1 Input
Description: Select the input terminal or a predefined fixed value for the speed reference.
Default Value:
Unit: -
P 5.8.4.2 Speed Reference 2 Input
Description: Select the input terminal or a predefined fixed value for the speed reference.
Default Value:
Unit: -
P 5.8.4.3 Speed Reference 1 Max.
Description: Set the maximum value of the reference. It defines the upper point for the scaling of the reference input.
Default Value: 100
Unit: Hz
P 5.8.4.4 Speed Reference 1 Min.
Description: Set the minimum value of the reference. It defines the lower point for the scaling of the reference input.
Default Value: 0
Unit: Hz
P 5.8.4.5 Speed Reference 2 Max.
Description: Set the maximum value of the reference. It defines the upper point for the scaling of the reference input.
Default Value: 100
Unit: Hz
P 5.8.4.6 Speed Reference 2 Min.
Description: Set the minimum value of the reference. It defines the lower point for the scaling of the reference input.
Default Value: 0
Unit: Hz
P 5.8.4.7 Preset Speed Reference Selector
Description: Select the preset reference. The preset reference can be selected as a fixed value or by 3 digital inputs.
© 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (-1000 — 1000)
Data Type: REAL
Parameter Type: Range (-1000 — 1000)
Data Type: REAL
Parameter Type: Range (-1000 — 1000)
Data Type: REAL
Parameter Type: Range (-1000 — 1000)
Data Type: REAL
Parameter Number: 501
Access Type: Read/Write
Parameter Number: 502
Access Type: Read/Write
Parameter Number: 1724
Access Type: Read/Write
Parameter Number: 1725
Access Type: Read/Write
Parameter Number: 1726
Access Type: Read/Write
Parameter Number: 1727
Access Type: Read/Write
AB318753549016en-000301 / 136R0284 |
207