Danfoss iC7 Motion Series Application Manual page 286

Application Guide | iC7 Series Motion
Default Value: NA
Unit: °C
P 2.1.16 Main Fan Speed
Description: Shows the speed of the main cooling fan.
Default Value: NA
Unit: rpm
P 2.1.17 Internal Fan Speed
Description: Shows the speed of the internal cooling fan.
Default Value: NA
Unit: rpm
P 2.1.19 Heat Sink Temperature Output
Description: Select the output indicating if the heat sink temperature is within range.
Default Value:
Unit: -
P 2.1.20 Drive DC-link Voltage Output
Description: Select the output indicating if the DC-link voltage is within range.
Default Value:
Unit: -
Filters & Brake Chopper Status (Menu Index 3.1)
6.7.2.3
P 3.1.1 Brake Power
Description: Shows the power dissipated in the brake resistor.
Default Value: NA
Unit: kW
P 3.1.2 Average Brake Power
Description: Shows the average power dissipated in the brake resistor, calculated over 120 s.
Default Value: NA
Unit: kW
284
| © 2023.11
Parameter Type: Range (-50 — 200)
Data Type: REAL
Parameter Type: Range (0 — 32767)
Data Type: INT
Parameter Type: Range (0 — 32767)
Data Type: INT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (0.00 — \*)
Data Type: REAL
Parameter Type: Range (0.00 — \*)
Data Type: REAL
Parameter Number: 2950
Access Type: Read Only
Parameter Number: 2931
Access Type: Read Only
Parameter Number: 2926
Access Type: Read Only
Parameter Number: 2312
Access Type: Read/Write
Parameter Number: 2311
Access Type: Read/Write
Parameter Number: 2933
Access Type: Read Only
Parameter Number: 2934
Access Type: Read Only
AB318753549016en-000301 / 136R0284