Danfoss iC7 Motion Series Application Manual page 155

Application Guide | iC7 Series Motion
Bit Description
10 Fieldbus communication
11 HMI connection
12 Feedback connection
13 Thermistor input
14 Auxiliary device (temperature)
15 External temperature measurement
P 5.1.13 Application Status Word
Bit Bit = False
0 Reserved
1 Inching not Active
2 Process Control not Active
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Reserved
13 Normal Reference
14 Normal Reference
15 Speed Within Limits
Protection (Menu Index 5.2)
6.6.4
Cooling Monitor (Menu Index 5.2.1)
6.6.4.1
P 5.2.1.1 Cooling Monitor Input
Description: Select the input for the negated cooling monitor signal.
© 2023.11
Event number
5162, 4256, 4257, 4258, 4260, 4261, 4263, 4265,
4266 ,4267, 4268, 4269, 4280, 4281, 4270, 4271, 4272,
4273, 4282, 4274, 4275, 4276, 4277, 4283, 4278, 4279
5141, 5142
4418
5157
4200, 4201, 4203, 4202
5132, 5133, 5134, 5135, 5136, 5137, 5158
Bit = True
Reserved
Inching Active
Process Control Active
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Freeze Reference
Reverse Reference
Speed Limit Active
AB318753549016en-000301 / 136R0284 |
153