Danfoss iC7 Motion Series Application Manual page 266

Application Guide | iC7 Series Motion
Selection Number
0
1
2
3
P 5.17.2.15 Homing On The Fly
Description: Activate the desired homing on the fly function.
Default Value: 0 [Disabled]
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
3
4
5
6
7
8
9
10
11
12
264
| © 2023.11
Selection Name
Power Down
Coast
Coast Running
Homing Only
Parameter Type: Selection
Data Type: UINT
Selection Name
Disabled
1st time after power up
1st time after power up (running in
positive direction)
1st time after power up (running in
negative direction)
1st time after start
1st time after start (running in positive
direction)
1st time after start (running in negative
direction)
1st time after coast
1st time after coast (running in positive
direction)
1st time after coast (running in negative
direction)
Every time
Every time (running in positive direction)
Every time (running in negative direction)
Selection Description
Parameter Number: 856
Access Type: Read/Write
Selection Description
AB318753549016en-000301 / 136R0284