Danfoss iC7 Motion Series Application Manual page 296

Application Guide | iC7 Series Motion
Default Value: NA
Unit: rpm
P 5.8.1.5 Feedback Electrical Angle
Description: Shows the feedback device angle in the electrical domain. Its value is needed for manually tuning the feedback angle offset.
Default Value: NA
Unit: °
P 5.8.1.6 Speed Error
Description: Shows the difference between speed reference after ramp and motor speed.
Default Value: NA
Unit: Hz
P 5.8.1.7 Speed Reference
Description: Shows the speed reference.
Default Value: NA
Unit: Hz
P 5.8.1.8 Speed Reference Before Ramp
Description: Shows the value of speed reference before the ramp generator.
Default Value: NA
Unit: Hz
P 5.8.1.9 Speed Reference After Ramp
Description: Shows the value of the speed reference after the ramp generator.
Default Value: NA
Unit: Hz
P 5.8.1.10 Final Speed Reference
Description: Shows the value of the speed reference before feeding it to the speed controller.
Default Value: NA
Unit: Hz
294
| © 2023.11
Parameter Type: Range (-10000 — 10000)
Data Type: REAL
Parameter Type: Range (0 — 360)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (-2000 — 2000)
Data Type: REAL
Parameter Type: Range (-2000 — 2000)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Number: 9007
Access Type: Read Only
Parameter Number: 9016
Access Type: Read Only
Parameter Number: 4023
Access Type: Read Only
Parameter Number: 1718
Access Type: Read/Write
Parameter Number: 6049
Access Type: Read Only
Parameter Number: 6150
Access Type: Read Only
Parameter Number: 6151
Access Type: Read Only
AB318753549016en-000301 / 136R0284