Danfoss iC7 Motion Series Application Manual page 278

Application Guide | iC7 Series Motion
Default Value: NA
Unit: -
Configuration (Menu Index 5.19.2)
6.6.20.2
P 5.19.2.1 Superimposed Start Input
Description: Select a digital input for starting the configured superimposed movement.
Default Value:
Unit: -
P 5.19.2.2 Superimposed Mode
Description: Select the starting point for the superimposed distance.
Default Value: 1 [Additive to Covered
Distance]
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
2
P 5.19.2.3 Superimposed Abort
Description: Abort the currently ongoing superimposed motion.
Default Value: NA
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
P 5.19.2.4 Superimposed Speed Difference
Description: Set the speed reference for the superimposed motion which will be added to the acutal speed of the underlying motion.
276
| © 2023.11
Parameter Type: Range (0 — 16777216)
Data Type: REAL
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Selection Name
Additive to Previous Target
Additive to Covered Distance
Absolute
Parameter Type: Selection
Data Type: BOOL
Selection Name
Disabled
Enabled
Parameter Number: 822
Access Type: Read Only
Parameter Number: 827
Access Type: Read/Write
Parameter Number: 825
Access Type: Read/Write
Selection Description
Parameter Number: 826
Access Type: Read/Write
Selection Description
Disables the function.
Enables the function.
AB318753549016en-000301 / 136R0284