Danfoss iC7 Motion Series Application Manual page 299

Application Guide | iC7 Series Motion
P 5.12.1.2 Mechanical Brake State
Description: Shows the state of the mechanical brake controller.
Default Value: NA
Unit: -
Maintenance & Service (Menu Index 6.1.1)
6.7.2.12
P 6.1.1.1 Last Fault Number
Description: Shows the number of the most recent active fault.
Default Value: NA
Unit: -
P 6.1.1.2 Last Warning Number
Description: Shows the number of the most recent active warning.
Default Value: NA
Unit: -
P 6.1.1.3 Control Unit Temperature
Description: Shows the temperature of the control unit.
Default Value: NA
Unit: °C
Software Information (Menu Index 6.2)
6.7.3
P 6.2.1 Application Version
Description: Shows the version of the application software.
Default Value: -
Unit:
Events (Menu Index 6.4)
6.7.4
Event Simulation (Menu Index 6.4.3)
6.7.4.1
P 6.4.3.1 Simulate Event
Description: Select a response to trigger a simulated event.
© 2023.11
Parameter Type: Range (0 — 32767)
Data Type: INT
Parameter Type: Range (0 — 65535)
Data Type: UINT
Parameter Type: Range (0 — 65535)
Data Type: UINT
Parameter Type: Range (-50 — 200)
Data Type: REAL
Parameter Type:
Data Type: STRING
Parameter Number: 3017
Access Type: Read Only
Parameter Number: 1610
Access Type: Read Only
Parameter Number: 1609
Access Type: Read Only
Parameter Number: 2952
Access Type: Read Only
Parameter Number: 151
Access Type: -
AB318753549016en-000301 / 136R0284 |
297