Danfoss iC7 Motion Series Application Manual page 79

Application Guide | iC7 Series Motion
Table 22: Datalogger Settings Fields (continued)
Field name
Trigger source
Signals
3.
Click Apply settings.
© 2023.11
Field description
Click the Add signal button under the Trigger source heading.
A Trigger source field appears. Click the Trigger sourcefield to
select the signal source which is used for triggering the data-
logger recording. The trigger source list opens in a new win-
dow:
Figure 53: Trigger source list
Click the Add signal button under the Signalsheading. A Sig-
nalfield appears. Click the Signal field to select the signals
that are logged. The signal list opens in a new window:
Figure 54: Signals list
AB318753549016en-000301 / 136R0284 |
77