Danfoss iC7 Motion Series Application Manual page 83

Application Guide | iC7 Series Motion
Figure 61: Source of Data to Restore
4. Click Next to select the backup source device and view the available backup files.
5.
If Project is the restore source, select the correct backup to restore. Click Next.
Figure 62: Select the Backup
6. Select the files for restoring data into the drive, as shown in the following image, and click Next.
Note:
It is possible to exclude Ethernet port settings when restoring the data.
© 2023.11 AB318753549016en-000301 / 136R0284 |
81