Danfoss iC7 Motion Series Application Manual page 285

Application Guide | iC7 Series Motion
P 2.1.3 DC-link Voltage
Description: Shows the actual DC-link voltage.
Default Value: NA
Unit: V
P 2.1.7 DC-link Power
Description: Shows the actual DC-link power.
Default Value: NA
Unit: kW
P 2.1.10 U-phase RMS Current
Description: Shows the U-phase RMS current.
Default Value: NA
Unit: A
P 2.1.11 V-phase RMS Current
Description: Shows the V-phase RMS current.
Default Value: NA
Unit: A
P 2.1.12 W-phase RMS Current
Description: Shows the W-phase RMS current.
Default Value: NA
Unit: A
P 2.1.14 Actual Relative Output Current Limit
Description: Shows the actual output current limit relative to the nominal motor current.
Default Value: NA
Unit: %
P 2.1.15 Heat Sink Temperature
Description: Shows the temperature of the power unit heat sink.
© 2023.11
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — \*)
Data Type: REAL
Parameter Type: Range (0 — 300)
Data Type: REAL
Parameter Number: 9044
Access Type: Read Only
Parameter Number: 5117
Access Type: Read Only
Parameter Number: 9020
Access Type: Read Only
Parameter Number: 9021
Access Type: Read Only
Parameter Number: 9022
Access Type: Read Only
Parameter Number: 2700
Access Type: Read Only
AB318753549016en-000301 / 136R0284 |
283