Danfoss iC7 Motion Series Application Manual page 282

Hide thumbs Also See for iC7 Motion Series:
Table of Contents

Advertisement

Application Guide | iC7 Series Motion
P 5.27.1.89 Fieldbus Control Word 2
Description: Shows the fieldbus control word 2.
Default Value: NA
Unit: -
P 5.27.1.90 Fieldbus Status Word 2
Description: Shows the profile specific fieldbus status word 2.
Default Value: NA
Unit: -
P 5.27.1.100 Fieldbus Process Reference
Description: Shows the fieldbus process reference used in the process controller.
Default Value: NA
Unit: -
Additional Information on Fieldbus Process Data Status
6.6.22.2
P 5.27.1.42 Fieldbus Control Word
The fieldbus control word is either the PROFIdrive control word described in
1
or the iC Speed control word described in
10.3.1.2 Fieldbus Profile.
P 5.27.1.50 Fieldbus Status Word
The fieldbus status word is either the PROFIdrive status word described in
1
or the iC Speed status word described in
10.3.1.2 Fieldbus Profile.
P 5.27.1.89 Fieldbus Control Word 2
The fieldbus control and status words are freely configurable, and specific features can be assigned to the bits.
P 5.27.1.90 Fieldbus Status Word 2
The fieldbus control and status words are freely configurable, and specific features can be assigned to the bits.
Auxiliary Device Control (Menu Index 5.33)
6.6.23
P 5.33.1 Motor and Cabinet Heater Ctrl. Output
Description: Select an output to control the motor and cabinet heaters.
Default Value:
Unit: -
280
| © 2023.11
Parameter Type: Range (\* — \*)
Data Type: WORD
Parameter Type: Range (0 — 65535)
Data Type: WORD
Parameter Type: Range (-32768 — 32767)
Data Type: INT
2.14.2 Control Word (CTW) in iC Speed
2.14.3 Status Word (STW) in iC Speed
Parameter Type: Selection
Data Type: UINT
Parameter Number: 1347
Access Type: Read/Write
Parameter Number: 1344
Access Type: Read Only
Parameter Number: 6046
Access Type: Read/Write
2.13.2 Control Word (CTW) in PROFIdrive Standard Telegram
Profile. The fieldbus profile is selected with parameter
2.13.3 Status Word (STW) in PROFIdrive Standard Telegram
Profile. The fieldbus profile is selected with parameter
Parameter Number: 220
Access Type: Read/Write
AB318753549016en-000301 / 136R0284

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic7 seriesIc7-automation

Table of Contents