Danfoss iC7 Motion Series Application Manual page 348

Application Guide | iC7 Series Motion
The following are the available network management protocol and fieldbus protocols:
SNMP
l
PROFINET
l
MODBUS TCP
l
EtherNet/IP
l
For more information, refer to the related fieldbus guide.
Communication interfaces (Menu Index 10.2)
6.11.2
Host Settings (Menu Index 10.2.1)
6.11.2.1
P 10.2.1.1 Fully Qualified Domain Name
Description: Fully Qualified Domain Name. Consists of a host name label and at least 1 higher-level domain separated by the symbol "."
with up to 240 characters in total. Each label contains upto 63 characters and starts with a lowercase letter and ends with alphanumeric
lowercase character and have as interior characters only alphanumeric lowercase characters and '-' .
Default Value: \*
Unit: -
Ethernet Interface X0 (Menu Index 10.2.2)
6.11.2.2
Interface X0 IPv4 Settings
6.11.2.2.1
The Ethernet Interface X0 IPv4 settings view contains the following fields:
Interface X0 MAC address
l
IPv4 addressing method
l
Requested IPv4 address
l
Requested IPv4 SUBNET mask
l
Requested IPv4 gateway address
l
Enable ACD
l
DNS server 1
l
DNS server 2
l
Interface X0 IPv4 Status
6.11.2.2.2
The Ethernet Interface X0 IPv4 status view contains the following fields:
Interface X0 MAC address
l
IPv4 addressing method
l
Actual IPv4 address
l
Actual IPv4 SUBNET mask
l
Actual IPv4 gateway address
l
DHCP server
l
Actual DNS server 1
l
Actual DNS server 2
l
ACD activity
l
346
| © 2023.11
Parameter Type: Range (\* — \*)
Data Type: STRING
Parameter Number: 7036
Access Type: Read/Write
AB318753549016en-000301 / 136R0284