Danfoss iC7 Motion Series Application Manual page 203

Application Guide | iC7 Series Motion
Description: Shows the speed reference.
Default Value: NA
Unit: Hz
P 5.8.1.8 Speed Reference Before Ramp
Description: Shows the value of speed reference before the ramp generator.
Default Value: NA
Unit: Hz
P 5.8.1.9 Speed Reference After Ramp
Description: Shows the value of the speed reference after the ramp generator.
Default Value: NA
Unit: Hz
P 5.8.1.10 Final Speed Reference
Description: Shows the value of the speed reference before feeding it to the speed controller.
Default Value: NA
Unit: Hz
P 5.8.1.11 Control Panel Speed Reference
Description: Shows the value of the speed reference given from the control panel.
Default Value: NA
Unit: Hz
P 5.8.1.12 Absolute Output Frequency Output
Description: Select an output terminal for the output frequency scaled between 0 Hz and positive speed limits in Hz.
Default Value:
Unit: -
P 5.8.1.13 Absolute Speed Reference Output
Description: Select an output terminal for the absolute speed reference, scaled between 0 and positive speed limit.
© 2023.11
Parameter Type: Range (-2000 — 2000)
Data Type: REAL
Parameter Type: Range (-2000 — 2000)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Range (\* — \*)
Data Type: REAL
Parameter Type: Selection
Data Type: UINT
Parameter Number: 1718
Access Type: Read/Write
Parameter Number: 6049
Access Type: Read Only
Parameter Number: 6150
Access Type: Read Only
Parameter Number: 6151
Access Type: Read Only
Parameter Number: 6153
Access Type: Read/Write
Parameter Number: 2300
Access Type: Read/Write
AB318753549016en-000301 / 136R0284 |
201