Danfoss iC7 Motion Series Application Manual page 326

Application Guide | iC7 Series Motion
Selection Number
897
9013
I/O (Menu Index 9)
6.10
I/O Overview
6.10.1
Parameter group 9 contains the parameters for the hardware configuration of the I/Os such as terminal modes, filtering of the electrical
signals and signal ranges.
This Application Guide contains only the parameter descriptions for the Basic I/O. The parameter information for option boards such as
the Encoder/Resolver Option OC7M0 can be found in the iC7 Functional Extensions Operating Guide.
Basic I/O
6.10.2
I/O Status (Menu Index 9.3)
6.10.2.1
P 9.3.1 Digital Input Status
Description: Shows the digital input I/O word. Each bit represents the status of a digital input.
Default Value: NA
Unit: -
P 9.3.2 Digital Output Status
Description: Shows the digital output I/O word. Each bit represents the status of a digital output.
Default Value: NA
Unit: -
P 9.3.3 T31 Analog Output Value
Description: Shows the actual value of the terminal.
Default Value: NA
Unit: -
P 9.3.4 T33 Analog Input Value
324
| © 2023.11
Selection Name
Distance Measurement Counter
Superimposed Actual Distance
Parameter Type: Range (\* — \*)
Data Type: WORD
Parameter Type: Range (\* — \*)
Data Type: WORD
Parameter Type: Range (0 — 20)
Data Type: REAL
Selection Description
Shows a continuous counter which is
incremented with each occurrence of a
distance calculation. The counter will start
from 0 and wraps around when exeeding
65535. The counter is reset to 0 when a
source selection is set to Disabled.
Shows the actual covered distance of
an active superimposed movement.
The value is reset a every start of a
superimposed movement.
Parameter Number: 1614
Access Type: Read Only
Parameter Number: 1615
Access Type: Read Only
Parameter Number: 1613
Access Type: Read Only
AB318753549016en-000301 / 136R0284