Danfoss iC7 Motion Series Application Manual page 176

Application Guide | iC7 Series Motion
Selection Number
3
4
5
8
P 5.5.3.2.6 CP Position Reference
Description: Select the position reference source for when the drive operates in local control.
Default Value: 1 [Local reference]
Unit: -
The following are the selections for the parameter.
Selection Number
1
2
3
4
5
Fieldbus control (Menu Index 5.5.4)
6.6.7.5
References (Menu Index 5.5.4.1)
6.6.7.5.1
P 5.5.4.1.1 Fieldbus Speed Reference
Description: Select the speed reference sources for when the drive operates in fieldbus control. Select 2 sources to combine them into 1
reference value.
Default Value: [2,0]
Unit: -
The following are the selections for the parameter.
Selection Number
0
2
3
174
| © 2023.11
Selection Name
Reference 1 input
Reference 2 input
Preset reference
Process ctrl. reference
Parameter Type: Selection
Data Type: UINT
Selection Name
Local reference
Fieldbus reference
Reference 1 input
Reference 2 input
Preset reference
Parameter Type: Selection
Data Type: UINT
Selection Name
None
Fieldbus reference
Reference 1 input
Selection Description
Use the reference from I/O reference 1.
Use the reference from I/O reference 2.
Use reference from the preset reference.
Use reference from the process control
reference.
Parameter Number: 1948
Access Type: Read/Write
Selection Description
Use local reference from the control panel.
Use reference from the fieldbus.
Use the reference from I/O reference 1.
Use the reference from I/O reference 2.
Use reference from the preset reference.
Parameter Number: 1914
Access Type: Read/Write
Selection Description
No source selected equals a 0 value.
Use reference from the fieldbus.
Use the reference from I/O reference 1.
AB318753549016en-000301 / 136R0284