Danfoss iC7 Motion Series Application Manual page 61

Application Guide | iC7 Series Motion
Control Panel Basic Configurations
3.2.3
The basic configurations of the control panel include:
A readout of the status of the motor and the drive, including warnings and faults.
l
Navigable menus, where the parameter settings of the drive can be viewed and changed.
l
Starting the Drive and Control Panel Display
3.2.4
While the drive is powering up until it is ready to operate, the control panel display shows the following:
x.x.x
Figure 27: Control Panel Display on Startup
1
The software version
When the drive is started, it takes 25–30 s for the drive to be in ready state and for the control panel display to change to the
Home screen (default).
Understanding Readout Screens
3.2.5
When the drive is in ready state, the control panel display shows the Home screen. By default, the Homescreen is shown as follows.
The Home screen can be customized.
iC7_Industry
1
Running - Speed Limit
2
Motor Frequency
Figure 28: Home Screen (Donut View vs. Line View)
© 2023.11
1
LOC
49.2 Hz
40.0
Hz
NOTICE
3 iC7_Industry
Running - Speed Limit
4
Motor Shaft Speed
5
Motor Torque
Motor Shaft Power
6
LOC
49.2 Hz
1800.0 rpm
196.31 Nm
37.00 kW
AB318753549016en-000301 / 136R0284 |
59