Danfoss iC7 Motion Series Application Manual page 271

Application Guide | iC7 Series Motion
The following are the selections for the parameter.
Selection Number
0
1
P 5.18.2.1.2 Touch Probe 2 Event Detected Output
Description: Select a digital output to signal that an event has been detected for touch probe 2.
Default Value:
Unit: -
P 5.18.2.1.3 Touch Probe 2 Active
Description: Shows that monitoring of touch probe 2 is active.
Default Value: NA
Unit: -
The following are the selections for the parameter.
Selection Number
0
1
P 5.18.2.1.4 Touch Probe 2 Active Output
Description: Select a digital output to signal that monitoring of touch probe 2 is active.
Default Value:
Unit: -
P 5.18.2.1.5 Touch Probe 2 Recorded Position
Description: Shows the recorded actual position at the latest touch probe 2 event.
Default Value: NA
Unit: -
P 5.18.2.1.6 Touch Probe 2 Recorded Position Output
Description: Select an analog output to represent the recorded actual position of the latest touch probe 2 event. The signal is scaled
between Min. Position Limit and Max. Position Limit.
© 2023.11
Selection Name
False
True
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: BOOL
Selection Name
False
True
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (-16777216 —
16777216)
Data Type: DINT
Selection Description
Fixed value - False.
Fixed value - True.
Parameter Number: 804
Access Type: Read/Write
Parameter Number: 893
Access Type: Read Only
Selection Description
Fixed value - False.
Fixed value - True.
Parameter Number: 805
Access Type: Read/Write
Parameter Number: 894
Access Type: Read Only
AB318753549016en-000301 / 136R0284 |
269