Danfoss iC7 Motion Series Application Manual page 213

Application Guide | iC7 Series Motion
Reference
P5.8.3.1 Positive Frequency Limit
(1729)
P5.8.3.3 MinimumFrequency (1203)
0
- Minimum Frequency
P5.8.3.2 Negative Frequency Limit
(1728)
P5.8.5.1 Freeze 1
Input (1000)
0
1
P5.8.5.2 Freeze
0
Up Input (1001)
1
P5.8.5.3 Freeze
0
Down Input (1002)
Figure 83: Reference Freeze Example
1
Freeze Up/Down Ramp Time
3
Freeze Up/Down Step Delta
Reference Freeze (Menu Index 5.8.5)
6.6.10.8
P 5.8.5.1 Freeze Input
Description: Select the digital input for freezing the reference. Freezing is used to control the speed reference with 2 digital inputs, 1
increasing the reference and the other decreasing the reference.
Default Value:
Unit: -
P 5.8.5.2 Freeze Up Input
Description: Select the digital input for increasing the reference while reference freezing is activated.
Default Value:
Unit: -
P 5.8.5.3 Freeze Down Input
Description: Select the digital input for decreasing the reference while reference freezing is activated.
Default Value:
Unit: -
P 5.8.5.4 Freeze Ramp Time
Description: Set the ramp time for increasing/decreasing the reference while reference freeze is active.
© 2023.11
(3) (2)
(1)
(2)
(1)
(3)
2
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Time
Time
Freeze Up/Down Ramp Delay
Parameter Number: 1000
Access Type: Read/Write
Parameter Number: 1001
Access Type: Read/Write
Parameter Number: 1002
Access Type: Read/Write
AB318753549016en-000301 / 136R0284 |
211