Danfoss iC7 Motion Series Application Manual page 280

Application Guide | iC7 Series Motion
Default Value:
Unit: -
P 5.26.1.3 On Reference Output
Description: Select an output to indicate that the unit is on reference.
Default Value:
Unit: -
P 5.26.1.4 Fault Event Output
Description: Select an output to indicate that a fault has occurred.
Default Value:
Unit: -
P 5.26.1.5 Warning Event Output
Description: Select an output to indicate that a warning has occurred.
Default Value:
Unit: -
P 5.26.1.26 Motor Disconnected Output
Description: Select an output to indicate that the motor is disconnected. Motor check must be enabled in disconnected motor response.
Default Value:
Unit: -
Fieldbus Process Data (Menu Index 5.27)
6.6.22
Fieldbus Process Data (Menu Index 5.27.1)
6.6.22.1
P 5.27.1.42 Fieldbus Control Word
Description: Shows the profile specific fieldbus control word.
Default Value: NA
Unit: -
P 5.27.1.43 Fieldbus Speed Reference
Description: Shows the fieldbus speed reference.
278
| © 2023.11
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Selection
Data Type: UINT
Parameter Type: Range (\* — \*)
Data Type: WORD
Parameter Number: 206
Access Type: Read/Write
Parameter Number: 207
Access Type: Read/Write
Parameter Number: 208
Access Type: Read/Write
Parameter Number: 209
Access Type: Read/Write
Parameter Number: 216
Access Type: Read/Write
Parameter Number: 1335
Access Type: Read/Write
AB318753549016en-000301 / 136R0284