Unparking The Call; Unparking A Second Call During A Call - Auerswald COMpact 5000 Operation Manual

Functions
Call Parking

Unparking the Call

Query key (for ISDN telephones) takes you back where you can redial the
internal base number with another park position.
4. Wait until you hear the ringtone.
5. Hang up the receiver.
6. Notify the desired communication partner of the waiting caller (e.g., by making an
announcement over the loudspeaker).
Unparking the Call
Requirements:
• Authorisation Call Parking assigned to the subscriber
• Configured base number
1. Pick up the receiver.
2. Enter the internal base number. Possible entries:
Internal base number for the parking zone
Direct exchange line telephone: with preceding **)
3. Dial the number of the park position. Possible entries:
0 to 9
You are talking with the waiting caller.

Unparking a Second Call During a Call

Requirements:
• Authorisation Call Parking assigned to the subscriber
During a call, proceed as follows:
1. Press the Flash key or the Query key.
424
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
(for exchange line request type