Requirements:
•
Configured door terminal
•
Configured door call
•
Configured relay with operating mode Gâche
•
Authorisation Ouvrir la porte assigned to subscriber or group
1. Pick up the receiver.
Note: During an existing call press the Flash key or the Query key and
dial 2.
You are connected with the door terminal.
2. Press the Flash key or the Query key.
3. Dial #.
Accepting an Alarm Call and Confirming the Alarm
An alarm can be signalled by the ringing of an internal or external phone. To
terminate the alarm loop and to switch off assigned relays, the alarm can be
confirmed.
Proceed as follows:
•
Using an internal or external phone
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Phoning
Incoming Calls
233