Table of Contents
Advertisement
Connect additional Accessories
The PBX allows the connection of a system display SD-420 (Auerswald
accessory). The system display can be connected to the PBX with the
built-in TAE-jack or with a remote TAE wall jack similar to other analog
telephones. The connection to the clamps have to be made with tele-
communications cable (e.g. JYY 0,6 mm).
You are in need of one wire pair for a system display SD-420. If you use
a wire diameter of 0,6 mm, the wires may have a length of 800 m
between the PBX and the wall jacks.
The connector of the system display is plugged into an F-coded jack
(Pic.
39).
Pic. 39:
Wall jack for the system display
or direct connection to an
available TAE jack
Connect the System Display SD-420
Connect additional Accessories
33
Hide quick links:
Advertisement
Table of Contents
