Show Tech-Support - Dell C9000 Series Reference Manual

show tech-support

Display a collection of data from other show commands, necessary for Dell Networking technical support to
troubleshoot switch operation.
C9000 Series
Syntax
show tech-support [linecard slot-id | page | pe pe-id stack-unit
unit-number]
From a PE console, use show tech-support stack-unit unit-number page
Parameters
linecard slot-id
page
pe pe-id
stack-unit unit-
number
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9 (0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Enter the slot ID of the line card for which you want to collect
information for tech support. The range of slot IDs is from 0 to 11.
Enter linecard all to collect troubleshooting information on all
line cards.
(OPTIONAL) Enter the keyword page to view 24 lines of text at a
time. Press the SPACE BAR to view the next 24 lines. Press the
ENTER key to view the next line of text.
(OPTIONAL) Enter the keyword pe and the port extender(PE) ID.
The PE ID range is from 0 to 255.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Enter the keyword stack-unit and the unit number. The stack-
unit range is from 0 to 7.
Description
Introduced on the C9010 and C1048P.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Control and Monitoring 168