Configuring Port-Based Traffic; Control; Port-Based Traffic Control Overview - Dell M6220 User Configuration Manual

Configuring Port-Based Traffic

Control

This chapter describes how to configure features that provide traffic control
through filtering the type of traffic or limiting the speed or amount of traffic
on a per-port basis. The features this section describes includes flow control,
storm control, protected ports, and Link Local Protocol Filtering (LLPF),
which is also known as Cisco Protocol Filtering.
The topics covered in this chapter include:
•

Port-Based Traffic Control Overview

• Default Port-Based Traffic Control Values
• Configuring Port-Based Traffic Control (Web)
• Configuring Port-Based Traffic Control (CLI)
• Port-Based Traffic Control Configuration Example
Port-Based Traffic Control Overview
Table 24-1 provides a summary of the features this chapter describes.
Table 24-1. Port-Based Traffic Control Features
Feature
Flow control
Storm control
Protected ports
LLPF
Description
Allows traffic transmission between a switch port and another
Ethernet device to be paused for a specified period of time when
congestion occurs.
Limits the amount of broadcast, unknown unicast, and multicast
frames accepted and forwarded by the switch.
Prevents traffic from flowing between members of the same
protected port group.
Filters proprietary protocols that should not normally be relayed
by a bridge.
Configuring Port-Based Traffic Control
24
687