Test And Terminal Setting Descriptions; Operation Mode (Smu) - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Section 6: Clarius

Test and terminal setting descriptions

The following topics provide descriptions of the parameters you can set for each instrument and

operation mode.

The following topics describe the operation modes that are available when a SMU is selected as the

Some of the operation modes allow sweeping or stepping. The figure below illustrates the difference

between steps and sweeps.

Open operation mode - SMU

Open operation mode maintains a zero-current state at the terminal, subject to the maximum voltage

compliance of the connected SMU.

You cannot set any parameters for the Open operation mode.

Model 4200A-SCS Parameter Analyzer Reference Manual

Figure 224: Stepping and sweeping example

4200A-901-01 Rev. C / February 2017