Hitachi H8S/2378, H8S/2378R Series Hardware Manual page 83

Table 2.7 Bit Manipulation Instructions (1)
Instruction Size*
BSET B
BCLR B
BNOT B
BTST B
BAND B
BIAND B
BOR B
BIOR B
Note:* Size refers to the operand size.
B: Byte
Function
1 → (<bit-No.> of <EAd>)
Sets a specified bit in a general register or memory operand to 1. The bit
number is specified by 3-bit immediate data or the lower three bits of a
general register.
0 → (<bit-No.> of <EAd>)
Clears a specified bit in a general register or memory operand to 0. The
bit number is specified by 3-bit immediate data or the lower three bits of
a general register.
∼ (<bit-No.> of <EAd>) → (<bit-No.> of <EAd>)
Inverts a specified bit in a general register or memory operand. The bit
number is specified by 3-bit immediate data or the lower three bits of a
general register.
∼ (<bit-No.> of <EAd>) → Z
Tests a specified bit in a general register or memory operand and sets or
clears the Z flag accordingly. The bit number is specified by 3-bit
immediate data or the lower three bits of a general register.
C ∧ (<bit-No.> of <EAd>) → C
Logically ANDs the carry flag with a specified bit in a general register or
memory operand and stores the result in the carry flag.
C ∧ (<bit-No.> of <EAd>) → C
Logically ANDs the carry flag with the inverse of a specified bit in a
general register or memory operand and stores the result in the carry
flag. The bit number is specified by 3-bit immediate data.
C ∨ (<bit-No.> of <EAd>) → C
Logically ORs the carry flag with a specified bit in a general register or
memory operand and stores the result in the carry flag.
C ∨ (∼ <bit-No.> of <EAd>) → C
Logically ORs the carry flag with the inverse of a specified bit in a
general register or memory operand and stores the result in the carry
flag. The bit number is specified by 3-bit immediate data.
Rev. 1.0, 09/01, page 39 of 904