Hitachi H8S/2378, H8S/2378R Series Hardware Manual page 79

Table 2.3 Data Transfer Instructions
Instruction Size*
MOV B/W/L
MOVFPE B
MOVTPE B
POP W/L
PUSH W/L
LDM L
STM L
Note: * Size refers to the operand size.
B: Byte
W: Word
L: Longword
Function
(EAs) → Rd, Rs → (EAd)
Moves data between two general registers or between a general register
and memory, or moves immediate data to a general register.
Cannot be used in this LSI.
Cannot be used in this LSI.
@SP+ → Rn
Pops a general register from the stack. POP.W Rn is identical to MOV.W
@SP+, Rn. POP.L ERn is identical to MOV.L @SP+, ERn
Rn → @-SP
Pushes a general register onto the stack. PUSH.W Rn is identcal to
MOV.W Rn, @-SP. PUSH.L ERn is identical to MOV.L ERn, @-SP.
@SP+ → Rn (register list)
Pops two or more general registers from the stack.
Rn (register list) → @-SP
Pushes two or more general registers onto the stack.
Rev. 1.0, 09/01, page 35 of 904