Main Power Switch - Riso ComColor 9050 Basic Manual

⑤ Paper Feed Pressure Adjustment Lever
Use to adjust the paper feed pressure to suit the paper type
in the standard tray.
⑥ Paper Feed Guide Lever
Use to slide or fix the standard tray paper guide. Levers are located
on both sides of the standard tray paper guide, in two positions.

⑦ Main Power Switch

Use to turn the main power ON and OFF. Usually the power is
left ON.
⑧ Power Inlets
Use to connect to the power cord. The top inlet is for a
scanner, and the bottom inlet is for the main unit.
⑨ Standard Tray Descent Button
Use to move the standard tray up or down when replacing or
adding paper to it.
⑩ Standard Tray Paper Guide
Use to prevent paper in the standard tray from becoming
misaligned.
⑪ Feed Tray
Set the paper to be used for printing here. Special paper
such as thick paper cannot be set. For details, see "Paper and
Originals" (p. 17).
⑫ USB Port
Use to connect a USB flash drive to save scanner data.
Use USB flash drive compatible with Mass Storage Class
and USB 1.1 or 2.0 specifications.
Stacking Trays
The RISO auto-control stacking tray and the wide stacking tray are available as optional stacking trays.
Printouts are ejected face-up.
• With the RISO auto-control stacking tray, the paper guides adjust automatically to fit the paper size.
• With the wide stacking tray, move the paper guides (sides and end) to match the size of the paper for printing.
●
The RISO auto-control stacking tray is shown in this illustration.
⑬ Scanner
Use to copy or scan documents that are read from the platen
glass or the ADF.
⑭ Scanner Lamp (green/red)
Lights up when the scanner is ready to be used. Flashes in
green when starting up or while reading, and flashes in red
when an error occurs.
⑮ Platen Glass
Set the original face down and aligned with the position of
the arrow in the top left.
⑯ Original Cover
Pull down to cover the original when reading it on the platen
glass.
⑰ Automatic Document Feeder (ADF)
Up to about 100 originals can be automatically fed.
⑱ ADF Original Unit Lever
Pull this lever up to open the original unit cover when
originals are jammed.
⑲ ADF Original Guide
Slide to fit the width of the original.
⑳ ADF Original Output Tray
Documents that are read from the ADF are output here.
㉑ Scanner Power Switch
Use to turn scanner power ON and OFF. Usually the power is
left ON.
① Paper Arranger
Set to suit the paper texture so that the output paper is neatly aligned.
(See p. 21.)
② Paper Guides Open Button
Use to spread the paper guides apart. Operation varies depending on
whether paper is present or not.
• When the machine is idle and there is no paper in the stacking tray, the
guides open to the loading position.
• When the machine is idle and there is paper in the stacking tray, the
paper guides spread apart, making it easy to remove the paper.
The paper guides that spread apart when the button is pressed vary
depending on the administrator settings.
This button is found only on the auto-control stacking tray.
③ Paper Guide (end)
④ Paper Guide (side)
Use to prevent output paper in the stacking tray from becoming misaligned.
Preparations for Use >> Read This First
ComColor Series Basic Guide 02
1