Mechanism; Main Drive Mechanism - Riso RZ9 Series Technical Manual

Hide thumbs Also See for RZ9 Series:

CHAPTER 3: MAIN DRIVE

Mechanism

When the main motor is turned ON, the motor pulley rotates and the rotation is transmitted to the main pulley

by the main belt. The main motor FG sensor detects the speed and the angle position of the print drum.

SW2 on the mechanical control PCB is a main motor free rotation switch. The main motor free rotation

activates even under the Low Power Mode.

SW1 on the mechanical control PCB must not be pushed by mistake. (Ref: Chapter 18)

DANKA AUSTRALIA PTY. LTD.

Motor pulley

[ 3 - 2 ] - Rev. 0.2

< Main motor >

Main motor FG sensor