Advertisement
9. Options (AF) Test Mode
Sensors, switches
No.
3000
AF-unit connection signal check
3001
AF Original registration sensor
3002
AF Original IN sensor
3003
AF Original OUT sensor
3004
AF original detection sensor
3005
AF Cover Set SW
3006
AF Original Size Sensor 1
3007
AF Original Size Sensor 2
3008
AF Original Feed Cover Sensor
3009
AF Original Width Det. Sensor 1
AF Original Width Det. Sensor 2
3010
3011
AF Original End Det. Sensor
3012
AF Flipper Sensor
No.
Motor solenoid system
3030
AF read pulse-motor CW
3031
AF read pulse-motor CCW
AF Read/Switch-back Pulse Motor
3032
AF Transfer Pulse Motor
3033
AF Original Feed Clutch Check
3034
AF Original Feed Base Solenoid
3035
Check
AF Flipper Solenoid Check
3036
No.
AF one cycle action with no Auto Base Control
Performs one AF scanning cycle.
1. Picks up original.
2. Scanner unit moves to home position.
3041
3. Shading compensation.
4. Scanner unit moves to scanning position.
5. Feeds and ejects the original.
6. Scanner unit moves back to the home position.
AF original feed action
Performs AF original feed operation
3042
1. Picks up original.
2. Feeds and ejects the original.
Orig. IN Sensor Sensitivity Adj.
3044
Sensitivity adjustment on the Original IN Sensor.
AF Original Guide Minimum Width
3045
Sets the VR value when the paper guides are brought to the minimum-width position.
AF Original Guide Maximum Width
3046
Sets the VR value when the paper guides are brought to the maximum-width position.
Data check
No.
3060
AF Guide width A/D data
AF Original Size Code
3061
DANKA AUSTRALIA PTY. LTD.
AF connected
Blocked (original detected)
Blocked (original detected)
Blocked (original detected)
Sensor light reflected back (original detected)
Switch ON (AF closed)
Light received (original detected)
Light received (original detected)
Closed
(Duplex AF only) Detected width is under 235mm.
(Duplex AF only) Detected width is over 270mm or under
190mm.
(Duplex AF only) Original detected.
(Duplex AF only) Original detected.
Activates the AF read pulse-motor in original feeding direction. o o o
Activates the AF read pulse-motor in reverse direction.
(Duplex AF only)
ON/OFF action. ON by START key. OFF by STOP key.
(Duplex AF only)
ON/OFF action. ON by START key. OFF by STOP key.
(Duplex AF only)
ON/OFF action. Clutch ON by START key. Automatically
OFF in 10 seconds.
(Duplex AF only)
ON/OFF action. Solenoid ON by START key. Automatically
OFF in 10 seconds.
(Duplex AF only)
ON/OFF action. Solenoid ON by START key. Automatically
OFF in 10 seconds.
Unit check
Detection status
00: No detection 01: A3
06: B5R
07:A5
08: A5R
(09:B6* 10: Postcard* 53: Custom*) - * Not detected by
Duplex AF Unit.
[ 17 - 29 ] - Rev. 0.2
CHAPTER 17: TEST MODE
Detection status
Remarks
Details
02: B4 03: A4
04:A4R 05: B5
3 5 9
o o o
o o o
o o o
o o o
o o o
x
x o
x
x o
x
x o
x
x o
x
x o
x
x o
x
x o
x
x o
3 5 9
o o
x
x
x o
x
x o
x
x o
x
x o
x
x o
3 5 9
o o o
o o
o
x
x o
x
x
o
x
x
o
3 5 9
x
x o
x
x o
RZ9 Series
Advertisement
Chapters
