Image Scanner Unit - Riso GR 3770 Technical Manual

2. IMAGE SCANNER UNIT

REMOVAL
1) Turn off the power and remove the stage glass.
2) Remove mounting screws (× 8) of the image scanner cover, remove the cover.
3) Remove mounting screws (× 2) of the image scanner wire stand, raise the stand.
4) Pulling out the image scanner connector, take out the flexible wire.
5) Remove mounting screws (× 2) of the image scanner unit, raise the scanner upward for removal.
Original stopper
- Precautions in Assembly -
• Mount the image scanner unit in parallel with the original stopper. (See Fig.a.)
• For fitting the image flexible wire, pulling out the connector once, insert the wire to the end and, then, push the
connector into.
Fig. a
3 - 11
FLAT BED IMAGE SCANNING SECTION
Image scanner wire stand
Image scanner cover
REMOVAL
GR3770