2
General Power Meter Functions
Setting Measurement Limits
You can configure the power meter to detect when a measurement has crossed
over a predefined upper and/or lower limit value.
Limits are boundaries set for a certain power range and it can be applied to
power, ratio or difference measurement.
Figure 2-48
In this application a swept frequency signal is applied to the input of the Device
Under Test. The power meter measures the output power. The limits have been
set at +4 dBm and +10 dBm. A fail occurs each time the output power is outside
these limits as shown in
+10 dBm
+4 dBm
Figure 2-49
118
Swept source
OUT
Limits checking applications
Amplitude
o
o
o
Limits checking results
Device under test
OUT
Figure
2-49.
Fail
o
o
o
o
Fail
Frequency
Keysight N1911A/1912A User's Guide
Power meter
Upper Limit Line
Lower Limit Line