Clear Config - Dell S4810 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Usage
To prevent the link state database from receiving incorrect routing information
Information
from unauthorized routers, use the area-password command on routers within
an area.
The configured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related
•
Commands
•

clear config

Clear IS-IS configurations that display under the router isis heading of the show running-config
command output.
S4810
Syntax
clear config
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.1
Usage
Information
964
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
domain-password — allows you to set the authentication password for a
routing domain.
isis password — allows you to configure an authentication password for an
interface.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will
be erased.
Intermediate System to Intermediate System (IS-IS)