Show Ip Pim Rp Hash - Dell Networking 7048 Reference Manual

192.168.20.2
If no neighbors are learned on any of the interfaces, the following message is
displayed.
No neighbors are learned on any interface.

show ip pim rp hash

The show ip pim rp hash command displays the rendezvous point (RP)
selected for the specified group address.
Syntax
show ip pim rp hash
group-address — A valid multicast address supported by RP.
•
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed:
Field
RP Address
Type
Example
console#show ip pim rp hash 224.1.2.0
RP Address192.168.10.1
TypeStatic
If no RP Group mapping exists on the router, the following message is
displayed:
VLAN0010
group-address
Description
Address of the RP
Origin from where this group mapping was learned.
00:03:50
Multicast Commands
00:02:10
1141