Show Ip Pimsm Rp Mapping - Dell PowerConnect 8024 Cli Reference Manual

show ip pimsm rp mapping

The show ip pimsm rp mapping command is used to display all group-to-RP mappings of which
the router is aware (either configured or learned from the bootstrap router (BSR)). If no RP is
specified, all active RPs are displayed. This command deprecates the show ip pimsm rp
candidate, show ip pimsm staticrp and show ip pimsm rp commands.
Syntax
rp-address
show ip pimsm rp mapping [ ]
rp-address
— An RP address.
Default configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip pimsm rp mapping
Group Address.................................. 225.1.0.0
Group Mask..................................... 255.255.255.0
RP Address..................................... 1.1.1.1
origin......................................... Static
Group Address.................................. 225.2.0.0
Group Mask..................................... 255.255.255.0
RP Address..................................... 2.2.2.2
origin......................................... BSR
726
Multicast Commands