Show Ip Pimsm Rp Mapping - Dell PowerConnect 6224 Command Line Interface Manual

User Guidelines
The following fields are displayed:
RPAddress of the RP for the group specified
OriginIndicate by which mechanism (BSR or static) the RP was selected.
Example
console#show ip pimsm rphash 225.1.0.5
RP
Address
---------------- -----
1.1.1.1

show ip pimsm rp mapping

The show ip pimsm rp mapping command is used to display all group-to-RP
mappings of which the router is aware (either configured or learned from the
bootstrap router (BSR)). If no RP is specified, all active RPs are displayed.
This command deprecates the show ip pimsm rp candidate, show ip pimsm
staticrp and show ip pimsm rp commands.
Syntax
show ip pimsm rp mapping [
rp-address
— An RP address.
Default configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
852
Multicast Commands
Type
Static
rp-address
]