46.3
Access
STAKEOUT
Configuration,
General page
Stakeout
Configuring Stakeout
Select Main Menu: Programs...\Stakeout. In STAKEOUT Stakeout Begin press CONF
(F2) to access STAKEOUT Configuration.
OR
Press PROG. Highlight Stakeout. CONT (F1). In STAKEOUT Stakeout Begin press
CONF (F2) to access STAKEOUT Configuration.
OR
Press SHIFT CONF (F2) in STAKEOUT XX Stakeout.
This screen consists of the General page, the Checks page, the Heights page and the
Logfile page. The explanations for the softkeys given below are valid for all pages, unless
otherwise stated.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
DMASK (F3)
Accesses CONFIGURE Define Display Mask
n. Available for <Display Mask:> being high-
lighted on General page. Refer to "16.2
Display Settings".
PAGE (F6)
To change to another page on this screen.
TPS1200
1165