Leica TPS1200 series Technical Reference Manual page 1233

Survey - Auto Points
Step Description
12. CONT (F1) closes the screen and returns to SURVEY Survey: Job Name, Auto
page.
13. SURVEY Survey: Job Name, Auto page
START (F1) starts logging of auto points and offset points.
14. Walk along the centre line of the road as far as points need to be picked up.
OFST1 (F4) to change the offset or the height difference between the auto points
on the centre line and the right side of the road.
OFST2 (F5) to change the offset or the height difference between the auto points
on the centre line and the left side of the road.
15. STOP (F1) ends recording of auto points and offset points.
The stopping measuring auto points is indicated in the EDM icon.
16. After finishing the survey, import the data into a CAD package. If the offset point
ID's or codes fulfill the requirements of the CAD package, the offset points to the
right and to the left of the road are automatically strung together.
TPS1200 1233