Staking Out A Dtm - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Staking Out a DTM

With the Stakeout application program a Digital Terrain Model can be staked. The heights of

the current positions are compared against those of a selected DTM job. The height differ-

ences are calculated and displayed.

Staking a DTM may be used for

staking out where the DTM represents the surface to be staked.

quality control purposes where the DTM represents the final project surface.

DTM jobs are created in LGO. DTM jobs are stored in the \DBX directory on the active

memory device.

Refer to "46.2 Accessing Stakeout" to access STAKEOUT XX Stakeout.

P1 Point to be staked

<CUT:> or <FILL:>

Reflector height