Leica TPS1200 series Technical Reference Manual page 1058

Sets of Angles
Description of Sets of Angles Menu options
SETS menu options Description
Manage Points List
Measure New Points To define the target points and to measure the first set.
Measure Sets
Calculate Angles
Calculate Distances To calculate distances and their residuals.
End Sets of Angles
Next step
IF the Sets of Angles THEN
application program
is to be accessed highlight the relevant option and press CONT (F1). Refer to stated
chapters above.
is to be configured CONF (F2). Refer to "44.2.2 Configuring Sets of Angles".
is to be ended highlight End Sets of Angles and CONT (F1).
TPS1200
To create, edit and manage a points list of the target
points for the survey.
To measure the second set and any further sets.
To calculate horizontal/vertical angles and their residuals. 44.2.6
To end the Sets of Angles program.
1058
Refer to
chapter
44.2.3
44.2.4
44.2.5
44.2.6