Leica TPS1200 series Technical Reference Manual page 1199

SURVEY
Survey Begin
Survey - General
Description of fields
Field Option
<Job:> Choicelist
<Coord System:> Output
<Codelist:> Choicelist
CONT (F1)
To accept changes and access the subsequent
screen. The chosen settings become active.
CONF (F2)
To configure SmartCodes,auto points and
remote point measurements. Accesses
SURVEY Configuration. Refer to "48 Survey -
Auto Points" and to "49 Survey - Remote Point"
for information on the fields and keys.
SETUP (F3)
To set up station. Accesses SETUP Station
Setup.
CSYS (F6)
To select a different coordinate system.
Description
The active job. All jobs from Main Menu:
Manage...\Jobs can be selected.
The coordinate system currently attached to the
selected <Job:>.
No codes are stored in the selected job. All codelists
from Main Menu: Manage...\Codelists can be
selected.
TPS1200 1199