Leica TPS1200 series Technical Reference Manual page 1039

Reference Plane & Face Scan
Description of fields
Field Option
<Task:> Measure to
Plane
Scan
<Plane to Use:> Create New
Plane
Select From
Job
<Ref Plane:> Choicelist
<No. of Points:> Output
<Std Deviation:> Output
<Max ∆d:> Output
<Offset:> Output
<Origin:> Output
Description
The coordinates of measured points are calculated
relative to the reference plane.
Measures a sequence of points along a vertical, tilted
or horizontal face.
Defines a new reference plane.
Reference plane is selected in <Ref Plane:>.
Available for <Plane to Use: Select From Job>. The
reference plane to be used. Accesses REFPLANE
Manage Reference Planes.
Available for <Plane to Use: Select From Job>.
Number of points used for plane definition for the
plane shown in the <Ref Plane:>.
Standard deviation of used points for plane definition.
----- is displayed for less than four points.
Maximum distance between a point and the calcu-
lated plane. ----- is displayed for less than four points.
The offset method used as defined in REFPLANE
XX Reference Plane, Offset page.
The origin method used as defined in REFPLANE
XX Reference Plane, Origin page.
TPS1200 1039