Leica TPS1200 series Technical Reference Manual page 1254

Survey Cross Section
X-SECTION
Survey: Job Name,
General page
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
TPS1200
ALL (F1)
To measure and store distances and angles.
DIST (F2)
To measure and display distances. Available
unless <EDM Mode: Tracking> and/or <Log
Auto Pts: Yes>, after the tracking or logging is
started.
REC (F3)
To record data.
If <EDM Mode: Tracking> and/or <Log Auto
Pts: Yes>, records measured point and
continues tracking.
START (F4) and END (F4)
To open and close the selected cross section
template. While the template is open, the
elements of the cross section can be surveyed.
SURVY (F5)
To manually occupy a point that is not part of
the cross section. The point is not treated as an
element of the cross section. The open
template remains open.
Available if a template has been opened with
START (F4).
PAGE (F6)
To change to another page on this screen.
1254