Properties of remote
points
Averaging of remote
points
Survey - Remote Point
To ensure correct results, the remote point and the reflector must be lined up vertically. If it
is not possible to maintain an exactly vertical line, the acceptable <Hz Dist Tol:> must be
chosen. The horizontal distance to the remote point and to the base point should coincide.
The properties stored with auto points are:
•
Class: MEAS
•
Sub class: TPS
•
Source: Survey (Rem Pt)
•
Instrument source: TPS
An average can be calculated for remote points if a measured point of class MEAS already
exists with the same point ID. The average flag for the point is AUTO.
TPS1200
1235