Leica TPS1200 series Technical Reference Manual page 1164

Stakeout
Field Option
<DTM Job:> Choicelist
<Config Set:> Choicelist
<Reflector:> Choicelist
<Add. Constant:> Output
Next step
IF the Stakeout THEN
application
program
is to be accessed CONT (F1) accepts the changes and accesses Stakeout application
program. Refer to "46.4 Staking Out".
is to be configured CONF (F2). Refer to "46.3 Configuring Stakeout".
TPS1200
Description
Available for <Use DTM: DTM only> and <Use
DTM: DTM & Stake Job> in STAKEOUT Configu-
ration, Heights page. To select a DTM to be staked
and to select the active DTM layer to be used.
Heights are then staked out relative to the selected
DTM. Refer to "46.4.5 Staking Out a DTM".
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
The reflector currently set in the selected configura-
tion set. All reflectors from Main Menu:
Manage...\Reflectors can be selected.
The additive constant stored with the chosen
reflector.
1164