Leica TPS1200 series Technical Reference Manual page 1203

Hide thumbs Also See for TPS1200 series:

Table of Contents

Survey - General

To access the SURVEY EDM Test

Signal/Frequency screen. Available for <EDM

Mode: Tracking> and/or <Log Auto Pts:

Yes>, after the tracking or logging is started.

SHIFT CONF (F2)

To configure auto points and remote point

measurements. Accesses SURVEY Configu-

ration. When SHIFT AVGE (F2) or SHIFT

ABS (F2) are active, this key is not available.

Refer to "48 Survey - Auto Points" and to "49

Survey - Remote Point" for information on the

fields and keys.

SHIFT AVGE (F2)

To check the residuals for the averaged point.

Available for <Averaging Mode: Average>

and for more than one measured coordinate

triplet recorded for the same point. Refer to

"6.3.4 Mean Page".

SHIFT ABS (F2)

To check the absolute difference between the

measurements. Available for <Averaging

Mode: Absolute Diffs> and for more than one

measured coordinate triplet recorded for the

same point. Refer to "6.3.4 Mean Page".