Leica TPS1200 series Technical Reference Manual page 1204

Survey - General
Description of fields
Field Option
<Point ID:> User input
TPS1200
SHIFT 2FACE (F4)
To take a measurement in Face I and Face II.
The point stored is an average of the two
measurements.
When using instruments fitted with ATR, the
point is automatically measured in both faces,
the resulting point is stored and the instrument
is returned to the first face.
This hotkey is only available for <EDM Mode:
Standard> and <EDM Mode: Fast> and in the
Survey, Reference Line and Stakeout
programs.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "16.1 ID Templates".
Description
The identifier for measured points. The configured
point ID template is used. The ID can be changed:
• To start a new sequence of point ID's overtype the
point ID.
• For AN individual number independent of the ID
template SHIFT INDIV (F5). SHIFT RUN (F5)
changes back to the next ID from the configured
ID template. Refer to "16.1 ID Templates".
1204