Working Example - Leica TPS1200 series Technical Reference Manual

49.4
Description
Measuring remote
points step-by-step
Survey - Remote Point

Working Example

Application:
Working technique:
Settings:
Step Description
The reflector height at the base point is always applied in the calculation of the
base point elevation. For the calculation of the remote point elevation the reflector
height is automatically set to zero.
1. Aim at the reflector that is placed at the base point, which is directly underneath
the remote point to be measured.
2. SURVEY Survey: Job Name
DIST (F2) to measure the horizontal distance to the base point.
3. REMOT (F4).
4. Aim at the remote point to be measured.
5. SURVEY Survey Remote Point, Remote Pt page
STORE (F1) to measure and store the angle measurements and calculated coor-
dinates for the remote point.
Pick up points along a bridge. The points to be measured are not
directly accessible with a reflector.
Remote point surveying.
<Use Remote Pt: Yes> in the SURVEY Configuration, Remote
Pt page.
TPS1200 1241