Leica TPS1200 series Technical Reference Manual page 1099

Hide thumbs Also See for TPS1200 series:

Table of Contents

Description of fields

<Setup Reminder:> Choicelist

Current instrument setup details can be displayed to

remind the user to either keep the current instrument

setup or to create a new instrument setup.

Refer to "45.6.1 Setup Reminder" for details.

Whenever CONT (F1) is pressed in a Begin screen,

the current setup information is displayed.

Whenever CONT (F1) is pressed in a Begin screen,

the current setup information is not displayed and the

program continues as normal.

Defines if the instrument measures the second face

automatically after storing the first.

After storing a measurement with ALL (F1) or REC

(F3) motorised instruments change face automati-

cally, non-motorised instruments access SETUP

Telescope Positioning. The measurements of face I

and face II are averaged on the base of face I. The

averaged value is stored.

No automatic measurement in two faces.

For the setup methods <Method: Set

Azimuth> or <Method: Known BS Point> the

selected option in the field <Two Faces:> is

ignored. For these setup methods, measure-

ments are not made in two faces.