Leica TPS1200 series Technical Reference Manual page 1219

Survey - Auto Points
Description of fields
Field Option
<Auto Pt ID:> User input
Time and Date Available for <Auto Pts: Time & Date> in
<Reflector Ht:> User input
<Msd Auto Pts:> Output
<Code (Auto):>
Description
Available unless <Auto Pts: Time & Date> in
CONFIGURE ID Templates. The identifier for auto
points. The configured ID template for auto points is
used. The ID can be changed. To start a new
sequence of point ID's overtype the point ID.
CONFIGURE ID Templates. The current local time
and date is used as identifier for auto points.
The default reflector height as defined in the active
configuration set is suggested.
Available after pressing START (F1) and before
pressing STOP (F1). The number of auto points
measured since START (F1) has been pressed.
The thematical code for the auto point.
• If a point code is selected then any open line/area
is closed. The occupied point is stored with the
selected code idependently of any line/area.
TPS1200 1219